Max discharge capacity of 16,800 gallons per hour (280 gallons per minute)
Max pressure of 190 PSI
Max total head 438 feet (based on water at 70F)
Exhaust Prime up to 20 feet of lift. Follow the step-by-step instructions on the pump or watch the videos for how to prime the pump. Initial filling of the pump is not required.
C.E.T. Fire Pumps has been manufacturing water pumps since 1908 and their attention to detail and quality is evident with the PFP-18HPVGD-MR-CE. Powered by a Briggs & Stratton Vanguard gasoline engine, this high pressure water pump is sure to turn heads with a maximum of 190 pounds per square inch of water pressure. This high pressure gas powered pump, combined with a total dynamic head of 438 feet make it an ideal pump for fire suppression. An ideal unit for drop-in units or any application that requires a water pump capable of high pressure. With folding handles and weighing in at 170 pounds it is easy to get into position. Included accessories include: full control panel with pressure gauge, vacuum gauge, low oil alert, throttle, choke, starter, panel light and priming valve.
Shipments < 150 lbs. Will Be By FedEx Or UPS To Garage Or Front Door
Shipments > 150 lbs. Will Be By Extes-Express, RL Carriers, Or Other To Curbside At Truck Deck Height
Standard Freight To Lower 48 States
Standard Freight Does Not Include Service To Alaska, Hawaii, Or Destinations Outside The United States.
Contact Us To Make Other Accommodations For Shipments Outside The Lower 48 States.