Quick Filter

Filter  
  1. Manufacturer Gorman-Rupp Remove This Item
  2. Manufacturer MP Pumps Remove This Item
Clear All
Manufacturer  
Pump Style  
Pump Type  
Power  
Inlet Diameter  
Outlet Diameter  
Phase  
Diaphragm Material (Elastomer)  
Pump Voltage  
Self Priming Pump  
Max Gallon Per Min (GPM) (See Pump Curve For Your Duty Point Estimates)  
Maximum Pressure (PSI)  
Max Total Head (Static)  
BEP Gallon Per Minute  
BEP Max PSI  
BEP Max Total Head (Static)  
Horsepower  
Engine/Motor Brand  
Housing Material  
Solids Handling  
Engine/Motor Type  
Pump RPM  
Float Switch  
Port Type(s)  
Impeller Material  
Seal Material (Mechanical Or Other)  
  1. Buna-N 3 items
  2. Buna-N/Carbon Ceramic 1 item
  3. Carbon Ceramic 1 item
  4. EPDM 8 items
  5. Silicon Carbide 23 items
  6. Silicon Carbide/Viton 9 items
  7. VITON 2 items
  8. VITON With Carbon & Ni-Resist Faces 30 items
  9. VITON With Carbon & Ceramic Faces 3 items
  10. Aluminum Alloy 356?T6 w/Gray Iron 30 Cutwater Insert 3 items
  11. Type 31, Mechanical, Self-Lubricated. Silicon Carbide Rotating and Stationary Faces.Fluorocarbon Elastomers (DuPont Viton or Equivalent). Stainless Steel 316 Cage and Spring. Maximum Temperature of Liquid Pumped 160F. 2 items
  12. Double, Grease-Lubricated w/Spring-Loaded Grease Cup. Sintered Bronze Stationary Seal Seats. Steel Rotating Faces. Maximum Temperature of Liquid Pumped 110F. Maximum Suction Pressure 10 psi. 5 items
  13. Type 31, Mechanical, Self-Lubricated. Silicon Carbide Rotating and Stationary Faces.Fluorocarbon Elastomers (DuPont Viton or Equivalent). Stainless Steel 18-8 Cage and Spring. Maximum Temperature of Liquid Pumped 160F. 1 item
  14. Mechanical Oil Lubricated. Carbon/Ceramic Faces with Buna-N Elastomers. 9 items
  15. Double, Mechanical, Oil Lubricated. Fluorocarbon Elastomers. Upper Faces: Carbon and Ceramic Rotating and Stationary Faces. Lower Faces: Silicon Carbide and Ceramic Rotating and Stationary Faces. 2 items
  16. Carbon / Silicon Carbide 2 items
  17. Carbon / Ceramic / Viton 189 items
  18. Silicon Carbide / Viton 3 items
  19. Type 21, Mechanical Seal with a Single Convolution 1 item
  20. Type 2, Mechanical Seal with a Double Convolution (Upgrade from T-21) / Silicon and Tungsten Faces 6 items
  21. Type 21, Mechanical Seal with a Single Convolution / Silicon Carbide 11 items
  22. Type 21, Mechanical Seal with a Single Convolution / Carbon Ceramic 6 items
  23. Type 21, Mechanical Seal with a Single Convolution / Ni-resist / Viton 1 item
  24. Type 31, Double Seal Designation for Type 21 10 items
  25. Type 31, Double Seal Designation for Type 21 / Oil Lubricated Bearings 1 item
  26. Ni-resist 1 item
  27. Ni-resist / EPDM 1 item
  28. Ni-resist / Neoprene 2 items
  29. Carbon / Silicon Carbide / EPDM 3 items
  30. Tyoe 9, Mechanical Seal for Chemical Duty / Teflon Gasket 1 item
Seal Type (Mechanical Or Other)  
Starting System  
Agency Compliance  
For Potable Water Use  
Temp. Range Low (F)  
Temp. Range High (F)  
Stk. Itm.  
Free Shipping  

Items 1-12 of 353

Set Descending Direction
Page
per page
© 2021 Absolute Water Pumps. All Rights Reserved.