Electric Pumps

Electric water pumps include a number of pump types including centrifugal, dewatering, diaphragm, portable utility, salt water, self-priming, sewage and trash, specialty, 3-phase pumps and more. Electric water pumps are an excellent choice for high performance applications where every bit of horsepower counts. Absolute Water Pumps stocks a full line of electric water pumps from Barmesa Pumps, Gorman-Rupp, IPT and AMT, featuring models with .04 - +100 HP, outlet diameters ranging from ⅜ - 12”, inlet diameters ranging from ¾ - 12”, and capabilities of moving 5 to well beyond 5000 Gallons Per Minute.
Filter  
  1. Seal Material (Mechanical Or Other) VITON With Carbon & Ni-Resist Faces Remove This Item
  2. Free Shipping No Remove This Item
Clear All
Manufacturer  
Pump Style  
Pump Type  
Power  
Inlet Diameter  
Outlet Diameter  
Phase  
Pump Voltage  
Self Priming Pump  
Max Gallon Per Min (GPM) (See Pump Curve For Your Duty Point Estimates)  
Maximum Pressure (PSI)  
Max Total Head (Static)  
BEP Gallon Per Minute  
BEP Max Total Head (Static)  
Horsepower  
Engine/Motor Brand  
Housing Material  
Solids Handling  
Engine/Motor Type  
Pump RPM  
Port Type(s)  
Seal Material (Mechanical Or Other)  
  1. VITON With Carbon & Ni-Resist Faces 30 items
  2. Buna-N 116 items
  3. Buna-N/Carbon Ceramic 12 items
  4. Buna-N/Carbon Ceramic 3 items
  5. Carbon Ceramic 1 item
  6. EPDM 12 items
  7. EPDM/EPR 34 items
  8. EPDM/Tungsten Carbide (Easy Replacement) 64 items
  9. Oil-Filled, Carbon-Ceramic, Silicon-Carbide 124 items
  10. Oil-Filled, Double 2 items
  11. Oil-Filled, SiC-SiC, Carbon-SiC 23 items
  12. Oil-Filled, SiC-SiC, SiC-SiC 13 items
  13. Silicon Carbide 24 items
  14. Silicon Carbide And Ceramic 8 items
  15. Silicon Carbide/Viton 17 items
  16. Teflon 6 items
  17. VITON 132 items
  18. VITON With Carbon & Ceramic Faces 2 items
  19. Mechanical Oil Lubricated. Carbon/Ceramic Faces with Buna-N Elastomers. 9 items
  20. Double, Mechanical, Oil Lubricated. Fluorocarbon Elastomers. Upper Faces: Carbon and Ceramic Rotating and Stationary Faces. Lower Faces: Silicon Carbide and Ceramic Rotating and Stationary Faces. 2 items
  21. Carbon / Silicon Carbide 91 items
  22. Silicon Carbide/Carbon/EPDM 37 items
  23. Carbon / Ceramic / Viton 189 items
  24. Silicon Carbide / Viton 3 items
  25. Type 21, Mechanical Seal with a Single Convolution 1 item
  26. Type 2, Mechanical Seal with a Double Convolution (Upgrade from T-21) / Silicon and Tungsten Faces 9 items
  27. Type 21, Mechanical Seal with a Single Convolution / Silicon Carbide 11 items
  28. Type 21, Mechanical Seal with a Single Convolution / Carbon Ceramic 6 items
  29. Type 21, Mechanical Seal with a Single Convolution / Ni-resist / Viton 1 item
  30. Type 31, Double Seal Designation for Type 21 10 items
  31. Type 31, Double Seal Designation for Type 21 / Oil Lubricated Bearings 1 item
  32. Ni-resist 1 item
  33. Ni-resist / EPDM 1 item
  34. Ni-resist / Neoprene 2 items
  35. Carbon / Silicon Carbide / EPDM 3 items
  36. Tyoe 9, Mechanical Seal for Chemical Duty / Teflon Gasket 1 item
Starting System  
Agency Compliance  
For Potable Water Use  
Temp. Range Low (F)  
Temp. Range High (F)  
Stk. Itm.  
Free Shipping  

Items 1-12 of 30

Set Descending Direction
Page
per page
© 2021 Absolute Water Pumps. All Rights Reserved.