CET Fire Pumps High Pressure Pump - PFP-27HP-2D, 4" Suction, Multiport Discharge, 650 Max GPM, 130 Max PSI, Kohler Gasoline
CH740 Kohler air cooled engine
V-Twin cylinder, 4-stroke gasoline engine
Electric start
6 gallon (22 l) detachable fuel tank
20 amp. charging, regulated
C.E.T. single stage centrifugal pump
Pump body made from high resistance aluminum alloy
Bronze impeller
Mechanical shaft seal
Exhaust priming system, guaranteed up to 20’ (6 meter) lift
Two 2.5” (65 mm) discharge port outlets fire type swing-out valve
One 4” (100 mm) suction port inlet
Included Accessories:
Pressure gauge
12-V battery
Once you hear the rumble of the Kohler CH740 on the PFP-23HPVGD-MR-CE High Pressure Pump, you will be convinced that this gas powered water pump truly is capable of 650 max gallons per minute. Yes, you read that correctly. Maximum flow rates of 39,000 gallons per hour from this 4 inch water pump will get the job done and the 6 gallon fuel tank will keep this 27 horsepower pump humming for hours. Also capable of 130 max PSI, you can still expect 25 GPM with 125 pounds per square inch. Not many high pressure water pumps can get that done. With its standard electric start, and using exhaust priming system, you will have no problems getting the bronze impeller spinning and moving water quickly. Speak to one of our Application Specialists today to discuss the entire CET High Pressure Pump series and see if the PFP-23HPVGD-MR-CE is the correct 4 inch gasoline water pump for you.
Shipments < 150 lbs. Will Be By FedEx Or UPS To Garage Or Front Door
Shipments > 150 lbs. Will Be By Extes-Express, RL Carriers, Or Other To Curbside At Truck Deck Height
Standard Freight To Lower 48 States
Standard Freight Does Not Include Service To Alaska, Hawaii, Or Destinations Outside The United States.
Contact Us To Make Other Accommodations For Shipments Outside The Lower 48 States.