CET Fire Pumps High Pressure Pump - PFP-23HPVGD-2D-CE, 4" Suction, Multiport Discharge, 650 GPM, 115 Max PSI, Briggs & Stratton
List Price:
$9,156.00
Sale Price
$7,961.00
SKU: PFP-23HPVGD-2D-CE
Model: PFP-23HPVGD-2D-CE
Status: Call For Availability
Documentation
| Brochure/Specification | |
| Brochure/Specification 3 | |
| Engine Owner Manual | |
| Warranty Terms & Conditions | |
| Pump Selection Guidebook |
Inlet Size
4"
Style
Engine Centrifugal Pump
Type
High Pressure Pump
GPM
650.0
Engine/Motor
Power
Gasoline
Compliance
All 50 States
Product Details
| Manufacturer | CET |
|---|---|
| SKU | PFP-23HPVGD-2D-CE |
| Model Number | PFP-23HPVGD-2D-CE |
| For Potable Water Use | No |
Engine/Motor Details
| Engine/Motor Brand | Briggs & Stratton |
|---|---|
| Engine Model | 380000 |
| Fuel Type | Gasoline |
| Engine/Motor Type | Air-Cooled, V-Twin, 4-Stroke |
| Starting System | Electric & Recoil |
| Horsepower | 23.0 HP |
| Pump RPM | 3600 |
| Fuel Tank | Not Included |
| Low Oil Shutdown/Alert | Yes |
| Tubular Roll Bar Frame | Yes |
| Altitude Affected | Yes, Call For More Information |
Accessories
| Hose Kit | Add @ Checkout |
|---|---|
| Battery | Not Included |
| Portability/Wheel Kit | Add @ Checkout |
| Portability Handle(s) | Fold-Away |
Warranty
| Warranty | 3 Years |
|---|
Other Information
| Weight (Lbs.) | 191 |
|---|---|
| Ship Weight (Lbs.) | 231 |
| Unit Dimensions | 24.75"L x 26.25"W x 25.75"H |
| Dimension No Wheel Kit | 24.75"L x 26.25"W x 25.75"H |
| Agency Compliance | ISO 1901, NFPA 1906, CARB (California), EPA Tier 4 |
| California Destination-Operators-Buyers Warning | Click Here For California Proposition 65 Warning |
| Stk. Itm. | No |
Documents
Pump Details
| Pump Brand | CET Fire Pump |
|---|---|
| Pump Type | High Pressure Pump |
| Pump Style | Engine Centrifugal Pump |
| Inlet Diameter | 4" |
| Outlet Diameter | 2 ea. @ 2.5" |
| BEP Gallon Per Minute | 120.0 |
| BEP Max Total Head (Static) | 225.0 |
| BEP Max PSI | 98 |
| Max Gallon Per Min (GPM) (See Pump Curve For Your Duty Point Estimates) | 650.0 |
| Max Total Head (Static) | 265 Feet |
| Maximum Pressure (PSI) | 115 |
| Max Suction Lift (Static, Wet, @ Sea Level) | Up to 20' |
| Solids Handling | No |
| Self Priming Pump | Yes, Manual Exhaust Prime |
| Pump Housing Drain | Yes |
| Housing Material | High Resistance Aluminum Alloy |
| Impeller Material | Bronze |
| Seal Type (Mechanical Or Other) | Mechanical |
| Seal Material (Mechanical Or Other) | Stainless Steel |
| Valve Type | Ball |
| Shaft Seal | Mechanical |
| Shaft Material | Stainless Steel |
| Temperature Range | To 200F |
| Pumps Stages | 1 |
| Port Type(s) | NST |
CET Fire Pumps High Pressure Pump- PFP-23HPVGD-2D-CE, 4" Suction, Multiport Discharge, 650 GPM, 115 Max PSI, Briggs & Stratton
- High Resistance Aluminum alloy housing and Bronze impeller
- Mechanical shaft seal
- One 4" suction inlet; Two 2.5" discharge outlet ports with Fire Type swing-out valve
- Briggs & Stratton 23.0 HP Vanguard, V-Twin cylinder, 4-stroke gasoline engine
- Electric start with recoil start as backup
- Max discharge capacity of 39,000 gallons per hour (650 gallons per minute)
- Max pressure of 115 PSI
- Max total head 265 feet (based on water at 70F)
- Exhaust Prime up to 20 feet of lift. Follow the step-by-step instructions on the pump or watch the videos for how to prime the pump. Initial filling of the pump is not required.
If high volume flow rates are what you require from a high pressure water pump then look no further than the C.E.T. Fire Pumps PFP-23HPVGD-2D-CE. With maximum flow rates as high as 650 gallons per minute, this high pressure diesel powered pump is more than capable of moving large volumes of water over a long distance. Whether used for filling your fire truck or to supply your pump truck or simply to carry water over a long distance for a non firefighting application, the PFP-23HPVGD-2D-CE can get the job done. With a total wet weight of 198 pounds and four folding handles for easy transportation, getting this high pressure diesel pump in place is a breeze. Comes standard with a 12 volt battery for easy electric start as well as a full control panel with pressure gauge, vacuum gauge, throttle, choke, starter, low oil alert, panel light and priming valve.
Customers Buying This Product Also Purchased These Accessories
-
JGB Cast Iron Foot Valve & Strainer, 4" - 039-DFVS40List Price: $463.00 Sale Price $402.00
- Shipments < 150 lbs. Will Be By FedEx Or UPS To Garage Or Front Door
- Shipments > 150 lbs. Will Be By Extes-Express, RL Carriers, Or Other To Curbside At Truck Deck Height
- Standard Freight To Lower 48 States
- Standard Freight Does Not Include Service To Alaska, Hawaii, Or Destinations Outside The United States. Contact Us To Make Other Accommodations For Shipments Outside The Lower 48 States.
We found other products you might like!
-
CET Fire Pumps High Pressure Pump - PFP-20HPHND-MR, 2.5"x1.5", 300 Max GPM, 205 Max PSI, HondaList Price: $6,633.00 Sale Price $5,767.00 -
CET Fire Pumps High Pressure Pump - PFP-11HPHND-M, 2.5"x2.5", 290 GPM, 115 Max PSI, HondaList Price: $4,250.00 Sale Price $3,695.00 -
CET Fire Pumps High Pressure Floating Pump - PFP-6HP-FL, 3"x2.5", 260 Max GPM, 40 Max PSI, KawasakiList Price: $1,977.00 Sale Price $1,719.00 -
CET Fire Pumps High Pressure Pump - PFP-25HP-DSL-MR, 2.5"x1.5", 310 Max GPM, 190 Max PSI, Kubota DieselList Price: $16,796.00 Sale Price $14,605.00 -
CET Fire Pumps High Pressure Pump - SM-PFP-20HPHND-MR, 2.5"x1.5", 300 Max GPM, 205 Max PSI, HondaList Price: $5,830.00 Sale Price $5,069.00 -
CET Fire Pumps High Pressure Floating Pump - PFP-13HPHND-FL, 3"x2.5", 360 Max GPM, 70 Max PSI, HondaList Price: $3,953.00 Sale Price $3,437.00
