CET Fire Pumps High Pressure Pump - PFP-18HPVGD-1D-CE, 4"x2.5", 475 GPM, 135 Max PSI, Briggs & Stratton
List Price:
$6,403.00
Sale Price
$5,567.00
SKU: PFP-18HPVGD-1D-CE
Model: PFP-18HPVGD-1D-CE
Status: Call For Availability
Documentation
Brochure/Specification | |
Brochure/Specification 3 | |
Engine Owner Manual | |
Warranty Terms & Conditions | |
Pump Selection Guidebook |
Inlet Size
4"
Style
Engine Centrifugal Pump
Type
High Pressure Pump
GPM
475.0
Engine/Motor
Power
Gasoline
Compliance
All 50 States
Product Details
Manufacturer | CET |
---|---|
SKU | PFP-18HPVGD-1D-CE |
Model Number | PFP-18HPVGD-1D-CE |
For Potable Water Use | No |
Engine/Motor Details
Engine/Motor Brand | Briggs & Stratton |
---|---|
Engine Model | 350000 |
Fuel Type | Gasoline |
Engine/Motor Type | Air-Cooled, V-Twin, 4-Stroke |
Starting System | Electric & Recoil |
Horsepower | 18.0 HP |
Pump RPM | 3600 |
Fuel Tank | Included, Detached |
Fuel Capacity | 2.25 Gallon |
Low Oil Shutdown/Alert | Yes |
Tubular Roll Bar Frame | Yes |
Altitude Affected | Yes, Call For More Information |
Accessories
Hose Kit | Add @ Checkout |
---|---|
Battery | Not Included |
Portability/Wheel Kit | Add @ Checkout |
Portability Handle(s) | Fold-Away |
Warranty
Warranty | 3 Years |
---|
Other Information
Weight (Lbs.) | 166 |
---|---|
Ship Weight (Lbs.) | 206 |
Unit Dimensions | 23.5"L x 22"W x 25.5"H |
Dimension No Wheel Kit | 23.5"L x 22"W x 25.5"H |
Agency Compliance | ISO 1901, NFPA 1906, CARB (California), EPA Tier 4 |
California Destination-Operators-Buyers Warning | Click Here For California Proposition 65 Warning |
Stk. Itm. | No |
Documents
Pump Details
Pump Brand | CET Fire Pump |
---|---|
Pump Type | High Pressure Pump |
Pump Style | Engine Centrifugal Pump |
Inlet Diameter | 4" |
Outlet Diameter | 2.5" |
BEP Gallon Per Minute | 75.0 |
BEP Max Total Head (Static) | 264.0 |
BEP Max PSI | 115 |
Max Gallon Per Min (GPM) (See Pump Curve For Your Duty Point Estimates) | 475.0 |
Max Total Head (Static) | 311 Feet |
Maximum Pressure (PSI) | 135 |
Max Suction Lift (Static, Wet, @ Sea Level) | Up to 20' |
Solids Handling | No |
Self Priming Pump | Yes, Manual Exhaust Prime |
Pump Housing Drain | Yes |
Housing Material | High Resistance Aluminum Alloy |
Impeller Material | Bronze |
Seal Type (Mechanical Or Other) | Mechanical |
Seal Material (Mechanical Or Other) | Stainless Steel |
Valve Type | Ball |
Shaft Seal | Mechanical |
Shaft Material | Stainless Steel |
Temperature Range | To 200F |
Pumps Stages | 1 |
Port Type(s) | NST |
CET Fire Pumps High Pressure Pump- PFP-18HPVGD-1D-CE, 4"x2.5", 475 GPM, 135 Max PSI, Briggs & Stratton
- High resistance aluminum alloy pump body and bronze impeller
- 4" suction inlet; 2.5" discharge outlet port
- Briggs & Stratton 18 HP air cooled gasoline engine
- V-Twin cylinder, 4-stroke
- 2.25 gallon integrated fuel tank
- Max discharge capacity of 28,500 gallons per hour (475 gallons per minute)
- Max pressure of 135 PSI
- Max total head 311 foot (based on water at 70F)
- Exhaust Prime up to 20 feet of lift. Follow the step-by-step instructions on the pump or watch the videos for how to prime the pump. Initial filling of the pump is not required.
- Halogen light is standard on the unit for use in dark, dimly lit environments. Optional upgrade to LED light available at Checkout.
- 12 VDC Battery included for electric start
- 3 Year limited warranty
The C.E.T. Fire Pumps PFP-18HPVGD-1D-CE is a gas powered high pressure 4 inch single stage centrifugal water pump. This high pressure water pump comes standard with a full control panel with; pressure gauge, vacuum gauge, throttle, choke, starter, low oil alert, panel light and priming valve. If high flow rates and high pressure are what your water pumping application calls for, then the PFP-18HPVGD-1D-CE has you covered. With a maximum flow up to 475 gallons per minute (at dead head) and a maximum of 135 pounds per square inch of water pressure, this pump is an ideal high pressure pump for drop in units or any job that requires high flow rates.
Customers Buying This Product Also Purchased These Accessories
-
JGB Cast Iron Foot Valve & Strainer, 4" - 039-DFVS40List Price: $463.00 Sale Price $402.00
- Shipments < 150 lbs. Will Be By FedEx Or UPS To Garage Or Front Door
- Shipments > 150 lbs. Will Be By Extes-Express, RL Carriers, Or Other To Curbside At Truck Deck Height
- Standard Freight To Lower 48 States
- Standard Freight Does Not Include Service To Alaska, Hawaii, Or Destinations Outside The United States. Contact Us To Make Other Accommodations For Shipments Outside The Lower 48 States.
We found other products you might like!
-
CET Fire Pumps High Pressure Pump - PFP-20HPHND-MR, 2.5"x1.5", 300 Max GPM, 205 Max PSI, HondaList Price: $6,633.00 Sale Price $5,767.00
-
CET Fire Pumps High Pressure Pump - SM-PFP-20HPHND-MR, 2.5"x1.5", 300 Max GPM, 205 Max PSI, HondaList Price: $5,830.00 Sale Price $5,069.00
-
CET Fire Pumps High Pressure Floating Pump - PFP-13HPHND-FL, 3"x2.5", 360 Max GPM, 70 Max PSI, HondaList Price: $3,953.00 Sale Price $3,437.00
-
CET Fire Pumps High Pressure Floating Pump - PFP-6HP-FL, 3"x2.5", 260 Max GPM, 40 Max PSI, KawasakiList Price: $1,977.00 Sale Price $1,719.00
-
CET Fire Pumps High Pressure Pump - PFP-11HPHND-M, 2.5"x2.5", 290 GPM, 115 Max PSI, HondaList Price: $4,250.00 Sale Price $3,695.00
-
CET Fire Pumps High Pressure Pump - PFP-25HP-DSL-MR, 2.5"x1.5", 310 Max GPM, 190 Max PSI, Kubota DieselList Price: $16,796.00 Sale Price $14,605.00