CET Fire Pumps High Pressure Pump - PFP-13HPHND-EM-HP80, 3" Suction, Muliport Discharge, 230 Max GPM, 115 Max PSI, Honda
GX390 Honda air cooled engine
Single cylinder, 4-stroke gasoline engine
12V electric start with recoil start as backup
1.6 gallon (6.1 l) integrated fuel tank
Charge coil 12V-3A
Direct drive C.E.T. single stage centrifugal pump
Pump body made from resistant aluminum alloy
Bronze impeller
Mechanical shaft seal
Self priming system
Two 1.5“ (38 mm) discharge outlets (NPSH threads)
One 2.5“ (65 mm) discharge outlet (NPSH threads)
One 3“ (76 mm) suction inlet (NPSH threads)
Included Accessories:
Low oil alert
With it's compact design and light weight in comparision to most gas powered centrifugal pumps, the C.E.T. High Pressure Pump PFP-13HPHND-EM-HP80 is a top perfomring high pressure pump. Powered by it's Honda GX390 gas powered, air cooled engine with electric start you can count on this pump to get the job done. With maximum flow rates up to 230 gallons per minute and maximum PSI of 115, this compact powerhouse packs a punch. With 3 (three) discharge port outlets you have plenty of options for discharging water in the manner that best suits your application. Ideal for worksites where a water pump with high pounds per square inch capabilities is a must. At Absolute Water Pumps, we trust the CET PFP-13HPHND-EM-HP80 to start when you need it, quickly achieve prime with it's self-priming system and get the job done when you need this pump to perform at peak performance.
Shipments < 150 lbs. Will Be By FedEx Or UPS To Garage Or Front Door
Shipments > 150 lbs. Will Be By Extes-Express, RL Carriers, Or Other To Curbside At Truck Deck Height
Standard Freight To Lower 48 States
Standard Freight Does Not Include Service To Alaska, Hawaii, Or Destinations Outside The United States.
Contact Us To Make Other Accommodations For Shipments Outside The Lower 48 States.