CET Fire Pumps High Pressure Pump - PFP-10HP-DSL, 2.5"x2.5", 275 GPM, 90 Max PSI, Hatz Diesel

List Price: $13,338.00 Sale Price $11,598.00
SKU: PFP-10HP-DSL
Model: PFP-10HP-DSL
Status: Call For Availability
Inlet Size
2.5"
Style
Engine Centrifugal Pump
Type
High Pressure Pump
GPM
275.0
Engine/Motor
Hatz
Power
Diesel
Compliance

All 50 States

Product Details

Manufacturer CET
SKU PFP-10HP-DSL
Model Number PFP-10HP-DSL
For Potable Water Use No

Engine/Motor Details

Engine/Motor Brand Hatz
Engine Model 1B40
Fuel Type Diesel
Engine/Motor Type 1-Cylinder, Air-Cooled, 4-Stroke
Starting System Electric & Recoil
Horsepower 10.0 HP
Pump RPM 3600
Fuel Tank Included, Integrated
Fuel Capacity 1.32 Gallon
Low Oil Shutdown/Alert No
Tubular Roll Bar Frame Yes
Altitude Affected Yes, Call For More Information

Accessories

Hose Kit Add @ Checkout
Battery Not Included
Portability/Wheel Kit Add @ Checkout
Portability Handle(s) Fold-Away

Warranty

Warranty 3 Years

Other Information

Weight (Lbs.) 185
Ship Weight (Lbs.) 225
Unit Dimensions 23.375"L x 20"W x 23.675"H
Dimension No Wheel Kit 23.375"L x 20"W x 23.675"H
Agency Compliance ISO 1901, NFPA 1906, CARB (California), EPA Tier 4
California Destination-Operators-Buyers Warning Click Here For California Proposition 65 Warning
Stk. Itm. No

Pump Details

Pump Brand CET Fire Pump
Pump Type High Pressure Pump
Pump Style Engine Centrifugal Pump
Inlet Diameter 2.5"
Outlet Diameter 2.5"
BEP Gallon Per Minute 125.0
BEP Max Total Head (Static) 176.0
BEP Max PSI 77
Max Gallon Per Min (GPM) (See Pump Curve For Your Duty Point Estimates) 275.0
Max Total Head (Static) 207 Feet
Maximum Pressure (PSI) 90
Max Suction Lift (Static, Wet, @ Sea Level) Up to 20'
Solids Handling No
Self Priming Pump Yes, Manual Exhaust Prime
Pump Housing Drain Yes
Housing Material High Resistance Aluminum Alloy
Impeller Material Bronze
Seal Type (Mechanical Or Other) Mechanical
Seal Material (Mechanical Or Other) Stainless Steel
Valve Type Ball
Shaft Seal Mechanical
Shaft Material Stainless Steel
Temperature Range To 200F
Pumps Stages 1
Port Type(s) NST

CET Fire Pumps High Pressure Pump- PFP-10HP-DSL, 2.5"x2.5", 275 GPM, 90 Max PSI, Hatz Diesel

  • Resistant aluminum alloy housing and Bronze impeller
  • Mechanical shaft seal
  • 2.5" suction inlet; 2.5" discharge outlet port
  • Hatz 1B40 air cooled engine
  • Single-cylinder, 4-stroke diesel
  • Electric start with recoil and recoil start as backup
  • Max discharge capacity of 16,500 gallons per hour (275 gallons per minute)
  • Max pressure of 90 PSI
  • Max total head 207 foot (based on water at 70F)
  • Exhaust Prime up to 20 feet of lift. Follow the step-by-step instructions on the pump or watch the videos for how to prime the pump. Initial filling of the pump is not required.
  • Swivel spotlight
  • 12 VDC Battery included for electric start
  • 3 Year limited warranty
  • Available in "Navy Version" (stainless steel frame, anodized pump body and marinized engine)

C.E.T. Fire Pumps delivers again with their PFP-10HP-DSL. This diesel powered high pressure water pump is powered by the always reliable Hats 1B40 air cooled engine. With flow rates up to 275 gallons per minute and a maximum of 90 pounds per square inch of available water pressure, this fire pump is designed for not just fire suppression applications but a wide variety of uses. Comes standard with a swivel spotlight,  14 amp alternator, pressure gauge, Vernier throttle and a 12 volt DC battery. 

YouTube Video
  • Shipments < 150 lbs. Will Be By FedEx Or UPS To Garage Or Front Door
  • Shipments > 150 lbs. Will Be By Extes-Express, RL Carriers, Or Other To Curbside At Truck Deck Height
  • Standard Freight To Lower 48 States
  • Standard Freight Does Not Include Service To Alaska, Hawaii, Or Destinations Outside The United States. Contact Us To Make Other Accommodations For Shipments Outside The Lower 48 States.
Learn More

We found other products you might like!

© 2021 Absolute Water Pumps. All Rights Reserved.