Berkeley Vertical Multi-Stage Centrifugal Pump - BVMX64-3-1-100, 4" Flange, 325 BEP GPM, Stainless Steel, EPDM Mechanical Seals, Potable Water Certified, Wet End Only
SKU: BVMX64-3-1-100
Model: BVMX64-3-1-100
Status: 16 Week Lead Time
Documentation
Pump Curve | |
Brochure/Specification | |
Brochure/Specification 2 | |
Owner Manual | |
Service Manual | |
Troubleshooting & General Safety | |
Warranty Terms & Conditions | |
Pump Selection Guidebook |
Inlet Size
4"
Style
Electric Centrifugal Pump
Type
Multi-Stage Booster Pump
GPM
430.0
Engine/Motor
None
Power
Pump Kit, Less Motor
Compliance
NSF/ANSI
61 & 372
All 50 States
Product Details
Manufacturer | Berkeley |
---|---|
SKU | BVMX64-3-1-100 |
Model Number | BVMX64-3-1-100 |
For Potable Water Use | Yes |
Engine/Motor Details
Engine/Motor Brand | None |
---|---|
Fuel Type | Pump Kit, Less Motor |
Engine/Motor Type | Pump Kit, Less Motor |
Starting System | NA |
Frequency | 60 Hz |
Pump RPM | 3500 |
Other Information
Weight (Lbs.) | 1 |
---|---|
Ship Weight (Lbs.) | 739 |
Dimension No Wheel Kit | 14.38"W x 56.2"H |
Agency Compliance | CARB (California), EPA |
NSF Certification | NSF 61 |
ANSI Designation | ANSI 372 |
California Destination-Operators-Buyers Warning | Click Here For California Proposition 65 Warning |
Stk. Itm. | No |
Repair Kits & Parts (Sold Separately)
Replacement Stack Kit | RS-VMX64-3-1 |
---|
Documents
Pump Details
Pump Type | Multi-Stage Booster Pump |
---|---|
Pump Style | Electric Centrifugal Pump |
Inlet Diameter | 4" |
Outlet Diameter | 4" |
BEP Gallon Per Minute | 325.0 |
BEP Max Total Head (Static) | 285.0 |
BEP Max PSI | 123 |
Max Gallon Per Min (GPM) (See Pump Curve For Your Duty Point Estimates) | 430.0 |
Max Total Head (Static) | 380 Feet |
Maximum Pressure (PSI) | 164 |
Max Casing (Working) Pressure | 435 PSI |
Self Priming Pump | No, Flooded Suction Only |
Pump Housing Drain | Yes |
Housing Material | 316 Stainless Steel |
Impeller Material | 316 Stainless Steel |
Impeller Sleeve Material | 316 Stainless Steel |
Seal Type (Mechanical Or Other) | Cartridge Type |
Seal Material (Mechanical Or Other) | EPDM |
Shaft Material | 316 Stainless Steel |
Temperature Range | 5-250 F |
Pump Base | Cast Iron |
Pumps Stages | 3-1 |
O-Ring Material | EPDM |
Port Type(s) | Flange |
Altitude Affected | Yes |
Berkeley Vertical Multi-Stage Centrifugal Pump - BVMX64-3-1-100, 4" Flange, 325 BEP GPM, Stainless Steel, EPDM Mechanical Seals, Potable Water Certified, Wet End Only
- 4" Flange
- 325 Best Efficiency Point Gallons Per Minute
- 285 Best Efficiency Point Total Dynamic Head
- Stainless Steel Pump Body
- EPDM Mechanical Seals
- 316 Stainless Steel Impeller
- Potable Water Certified: NSF 61 & ANSI 372
The Berkeley BVMX64-3-1-100 is a non-self-priming/gravity feed, industrial pump with high pressure and low output. Often called a jockey pump, it is an ideal pump for a wide variety of pumping applications; water supply, pressure boosting systems, water treatment and filtration, irrigation, high pressure washes, liquid transfer, firefighting systems, boiler feed, condensate return, booster service and many more.
- Shipments < 150 lbs. Will Be By FedEx Or UPS To Garage Or Front Door
- Shipments > 150 lbs. Will Be By Extes-Express, RL Carriers, Or Other To Curbside At Truck Deck Height
- Standard Freight To Lower 48 States
- Standard Freight Does Not Include Service To Alaska, Hawaii, Or Destinations Outside The United States. Contact Us To Make Other Accommodations For Shipments Outside The Lower 48 States.