Berkeley Vertical Multi-Stage Centrifugal Pump - BVMX1-11-700, 1.25" VIC, 10.4 BEP GPM, Stainless Steel, VITON Mechanical Seals, Potable Water Certified, Wet End Only
SKU: BVMX1-11-700
Model: BVMX1-11-700
Status: 16 Week Lead Time
Documentation
| Pump Curve | |
| Brochure/Specification | |
| Brochure/Specification 2 | |
| Owner Manual | |
| Service Manual | |
| Troubleshooting & General Safety | |
| Warranty Terms & Conditions | |
| Pump Selection Guidebook |
Inlet Size
1.25"
Style
Electric Centrifugal Pump
Type
Multi-Stage Booster Pump
GPM
13.0
Engine/Motor
None
Power
Pump Kit, Less Motor
Compliance
NSF/ANSI
61 & 372
All 50 States
Product Details
| Manufacturer | Berkeley |
|---|---|
| SKU | BVMX1-11-700 |
| Model Number | BVMX1-11-700 |
| For Potable Water Use | Yes |
Engine/Motor Details
| Engine/Motor Brand | None |
|---|---|
| Fuel Type | Pump Kit, Less Motor |
| Engine/Motor Type | Pump Kit, Less Motor |
| Starting System | NA |
| Frequency | 60 Hz |
| Pump RPM | 3500 |
Other Information
| Weight (Lbs.) | 51 |
|---|---|
| Ship Weight (Lbs.) | 66 |
| Dimension No Wheel Kit | 8.27"W x 17"H |
| Agency Compliance | CARB (California), EPA |
| NSF Certification | NSF 61 |
| ANSI Designation | ANSI 372 |
| California Destination-Operators-Buyers Warning | Click Here For California Proposition 65 Warning |
| Stk. Itm. | No |
Repair Kits & Parts (Sold Separately)
| Replacement Stack Kit | RS-VMX1-11 |
|---|
Documents
Pump Details
| Pump Type | Multi-Stage Booster Pump |
|---|---|
| Pump Style | Electric Centrifugal Pump |
| Inlet Diameter | 1.25" |
| Outlet Diameter | 1.25" |
| BEP Gallon Per Minute | 10.4 |
| BEP Max Total Head (Static) | 250.0 |
| BEP Max PSI | 108 |
| Max Gallon Per Min (GPM) (See Pump Curve For Your Duty Point Estimates) | 13.0 |
| Max Total Head (Static) | 321 Feet |
| Maximum Pressure (PSI) | 138 |
| Max Casing (Working) Pressure | 360 PSI |
| Self Priming Pump | No, Flooded Suction Only |
| Pump Housing Drain | Yes |
| Housing Material | 316 Stainless Steel |
| Impeller Material | 316 Stainless Steel |
| Impeller Sleeve Material | 316 Stainless Steel |
| Seal Type (Mechanical Or Other) | Cartridge Type |
| Seal Material (Mechanical Or Other) | VITON |
| Shaft Material | 316 Stainless Steel |
| Temperature Range | 5-250 F |
| Pump Base | Cast Iron |
| Pumps Stages | 11 |
| O-Ring Material | VITON |
| Port Type(s) | VIC (Grooved) |
| Altitude Affected | Yes |
Berkeley Vertical Multi-Stage Centrifugal Pump - BVMX1-11-700, 1.25" VIC, 10.4 BEP GPM, Stainless Steel, VITON Mechanical Seals, Potable Water Certified, Wet End Only
- 1.25" VIC
- 10.4 Best Efficiency Point Gallons Per Minute
- 250 Best Efficiency Point Total Dynamic Head
- Stainless Steel Pump Body
- VITON Mechanical Seals
- 316 Stainless Steel Impeller
- Potable Water Certified: NSF 61 & ANSI 372
The Berkeley BVMX1-11-700 is a non-self-priming/gravity feed, industrial pump with high pressure and low output. Often called a jockey pump, it is an ideal pump for a wide variety of pumping applications; water supply, pressure boosting systems, water treatment and filtration, irrigation, high pressure washes, liquid transfer, firefighting systems, boiler feed, condensate return, booster service and many more.
- Shipments < 150 lbs. Will Be By FedEx Or UPS To Garage Or Front Door
- Shipments > 150 lbs. Will Be By Extes-Express, RL Carriers, Or Other To Curbside At Truck Deck Height
- Standard Freight To Lower 48 States
- Standard Freight Does Not Include Service To Alaska, Hawaii, Or Destinations Outside The United States. Contact Us To Make Other Accommodations For Shipments Outside The Lower 48 States.
