Berkeley Vertical Multi-Stage Centrifugal Pump - BVM3-10-204, 1.25" Flange, 16 BEP GPM, 2.0 HP, 3-Phase, 208-230/460 Volts, TEFC, Cast Iron, EPDM Mechanical Seals
SKU: BVM3-10-204
Model: BVM3-10-204
Status: 16 Week Lead Time
Documentation
| Pump Curve | |
| Brochure/Specification | |
| Brochure/Specification 2 | |
| Owner Manual | |
| Service Manual | |
| Troubleshooting & General Safety | |
| Warranty Terms & Conditions | |
| Pump Selection Guidebook |
Inlet Size
1.25"
Style
Electric Centrifugal Pump
Type
Multi-Stage Booster Pump
GPM
24.0
Engine/Motor
Power
Electric
Compliance
All 50 States
Product Details
| Manufacturer | Berkeley |
|---|---|
| SKU | BVM3-10-204 |
| Model Number | BVM3-10-204 |
| For Potable Water Use | No |
Engine/Motor Details
| Engine/Motor Brand | Berkeley |
|---|---|
| Fuel Type | Electric |
| Engine/Motor Type | Totally Enclosed Fan Cooled |
| Starting System | NA |
| Horsepower | 2.0 HP |
| Phase | 3-Phase |
| Pump Voltage | 208 Volt (3-Phase), 230 Volt (3-Phase), 460 Volt (3-Phase) |
| Frequency | 60 Hz |
| Pump RPM | 3500 |
| NEMA Rating | NEMA 56C (Motor Frame) |
Other Information
| Weight (Lbs.) | 102 |
|---|---|
| Ship Weight (Lbs.) | 142 |
| Dimension No Wheel Kit | 9.88"W x 28.9"H |
| Agency Compliance | CARB (California), EPA |
| California Destination-Operators-Buyers Warning | Click Here For California Proposition 65 Warning |
| Stk. Itm. | No |
Repair Kits & Parts (Sold Separately)
| Replacement Stack Kit | RS-VM3-10 |
|---|
Documents
Pump Details
| Pump Type | Multi-Stage Booster Pump |
|---|---|
| Pump Style | Electric Centrifugal Pump |
| Inlet Diameter | 1.25" |
| Outlet Diameter | 1.25" |
| BEP Gallon Per Minute | 16.0 |
| BEP Max Total Head (Static) | 230.0 |
| BEP Max PSI | 99 |
| Max Gallon Per Min (GPM) (See Pump Curve For Your Duty Point Estimates) | 24.0 |
| Max Total Head (Static) | 313 Feet |
| Maximum Pressure (PSI) | 135 |
| Max Casing (Working) Pressure | 360 PSI |
| Self Priming Pump | No, Flooded Suction Only |
| Pump Housing Drain | Yes |
| Housing Material | Cast Iron |
| Impeller Material | Stainless Steel |
| Impeller Sleeve Material | Stainless Steel |
| Seal Type (Mechanical Or Other) | Cartridge Type |
| Seal Material (Mechanical Or Other) | EPDM |
| Shaft Material | Stainless Steel |
| Temperature Range | 5-250 F |
| Pump Base | Cast Iron |
| Pumps Stages | 10 |
| O-Ring Material | EPDM |
| Port Type(s) | Flange |
| Altitude Affected | Yes |
Berkeley Vertical Multi-Stage Centrifugal Pump - BVM3-10-204, 1.25" Flange, 16 BEP GPM, 2.0 HP, 3-Phase, 208-230/460 Volts, TEFC, Cast Iron, EPDM Mechanical Seals
- 1.25" Flange
- 16 Best Efficiency Point Gallons Per Minute
- 230 Best Efficiency Point Total Dynamic Head
- 2.0 HP
- 3-Phase
- 208-230/460 Volts
- Totally Enclosed Fan Cooled
- Cast Iron Pump Body
- EPDM Mechanical Seals
- Stainless Steel Impeller
The Berkeley BVM3-10-204 is a non-self-priming/gravity feed, industrial pump with high pressure and low output. Often called a jockey pump, it is an ideal pump for a wide variety of pumping applications; water supply, pressure boosting systems, water treatment and filtration, irrigation, high pressure washes, liquid transfer, firefighting systems, boiler feed, condensate return, booster service and many more.
- Shipments < 150 lbs. Will Be By FedEx Or UPS To Garage Or Front Door
- Shipments > 150 lbs. Will Be By Extes-Express, RL Carriers, Or Other To Curbside At Truck Deck Height
- Standard Freight To Lower 48 States
- Standard Freight Does Not Include Service To Alaska, Hawaii, Or Destinations Outside The United States. Contact Us To Make Other Accommodations For Shipments Outside The Lower 48 States.
