Berkeley Vertical Multi-Stage Centrifugal Pump - BVM15-3-102, 2" Flange, 97 BEP GPM, 7.5 HP, Single-Phase, 208, 230 Volts, TEFC, Cast Iron, EPDM Mechanical Seals
SKU: BVM15-3-102
Model: BVM15-3-102
Status: 16 Week Lead Time
Documentation
Pump Curve | |
Brochure/Specification | |
Brochure/Specification 2 | |
Owner Manual | |
Service Manual | |
Troubleshooting & General Safety | |
Warranty Terms & Conditions | |
Pump Selection Guidebook |
Inlet Size
2"
Style
Electric Centrifugal Pump
Type
Multi-Stage Booster Pump
GPM
125.0
Engine/Motor
Power
Electric
Compliance
All 50 States
Product Details
Manufacturer | Berkeley |
---|---|
SKU | BVM15-3-102 |
Model Number | BVM15-3-102 |
For Potable Water Use | No |
Engine/Motor Details
Engine/Motor Brand | Berkeley |
---|---|
Fuel Type | Electric |
Engine/Motor Type | Totally Enclosed Fan Cooled |
Starting System | NA |
Horsepower | 7.5 HP |
Phase | Single-Phase |
Pump Voltage | 208 Volt (Single-Phase), 230 Volt (Single-Phase) |
Frequency | 60 Hz |
Pump RPM | 3500 |
NEMA Rating | NEMA 213TC (Motor Frame) |
Other Information
Weight (Lbs.) | 216 |
---|---|
Ship Weight (Lbs.) | 256 |
Dimension No Wheel Kit | 11.88"W x 32.9"H |
Agency Compliance | CARB (California), EPA |
California Destination-Operators-Buyers Warning | Click Here For California Proposition 65 Warning |
Stk. Itm. | No |
Repair Kits & Parts (Sold Separately)
Replacement Stack Kit | RS-VM15-3 |
---|
Documents
Pump Details
Pump Type | Multi-Stage Booster Pump |
---|---|
Pump Style | Electric Centrifugal Pump |
Inlet Diameter | 2" |
Outlet Diameter | 2" |
BEP Gallon Per Minute | 97.0 |
BEP Max Total Head (Static) | 157.0 |
BEP Max PSI | 67 |
Max Gallon Per Min (GPM) (See Pump Curve For Your Duty Point Estimates) | 125.0 |
Max Total Head (Static) | 200 Feet |
Maximum Pressure (PSI) | 86 |
Max Casing (Working) Pressure | 360 PSI |
Self Priming Pump | No, Flooded Suction Only |
Pump Housing Drain | Yes |
Housing Material | Cast Iron |
Impeller Material | Stainless Steel |
Impeller Sleeve Material | Stainless Steel |
Seal Type (Mechanical Or Other) | Cartridge Type |
Seal Material (Mechanical Or Other) | EPDM |
Shaft Material | Stainless Steel |
Temperature Range | 5-250 F |
Pump Base | Cast Iron |
Pumps Stages | 3 |
O-Ring Material | EPDM |
Port Type(s) | Flange |
Altitude Affected | Yes |
Berkeley Vertical Multi-Stage Centrifugal Pump - BVM15-3-102, 2" Flange, 97 BEP GPM, 7.5 HP, Single-Phase, 208, 230 Volts, TEFC, Cast Iron, EPDM Mechanical Seals
- 2" Flange
- 97 Best Efficiency Point Gallons Per Minute
- 157 Best Efficiency Point Total Dynamic Head
- 7.5 HP
- Single-Phase
- 208, 230 Volts
- Totally Enclosed Fan Cooled
- Cast Iron Pump Body
- EPDM Mechanical Seals
- Stainless Steel Impeller
The Berkeley BVM15-3-102 is a non-self-priming/gravity feed, industrial pump with high pressure and low output. Often called a jockey pump, it is an ideal pump for a wide variety of pumping applications; water supply, pressure boosting systems, water treatment and filtration, irrigation, high pressure washes, liquid transfer, firefighting systems, boiler feed, condensate return, booster service and many more.
- Shipments < 150 lbs. Will Be By FedEx Or UPS To Garage Or Front Door
- Shipments > 150 lbs. Will Be By Extes-Express, RL Carriers, Or Other To Curbside At Truck Deck Height
- Standard Freight To Lower 48 States
- Standard Freight Does Not Include Service To Alaska, Hawaii, Or Destinations Outside The United States. Contact Us To Make Other Accommodations For Shipments Outside The Lower 48 States.