Berkeley by Pentair SAE Engine Mount Centrifugal Pump - B85719, Model B4ZQBH, 5"x4", Flanged, Cast Iron, S.A.E. Housing Size: 3, 4, 1.5-10T Shaft Spline Size
SKU: B85719
Model: B4ZQBH
Status: 4 Week Lead Time
Documentation
| Pump Curve | |
| Brochure/Specification | |
| Brochure/Specification 2 | |
| Brochure/Specification 3 | |
| Owner Manual | |
| Parts Manual | |
| Troubleshooting & General Safety | |
| Warranty Terms & Conditions | |
| Pump Selection Guidebook |
Inlet Size
5"
Style
SAE Centrifugal Pump
Type
SAE Centrifugal Pump
GPM
1,298.0
Engine/Motor
None
Power
SAE
Compliance
All 50 States
Product Details
| Manufacturer | Berkeley |
|---|---|
| SKU | B85719 |
| Model Number | B4ZQBH |
| For Potable Water Use | No |
Engine/Motor Details
| Engine/Motor Brand | None |
|---|---|
| Fuel Type | SAE |
| Starting System | NA |
| Pump RPM | Variable |
Warranty
| Warranty | 1 Year |
|---|
Origin
| Built In | United States (Assembly) |
|---|
Other Information
| Weight (Lbs.) | 300 |
|---|---|
| Ship Weight (Lbs.) | 340 |
| Unit Dimensions | 24.27"L x 17.76"W x 17.75"H |
| Agency Compliance | CARB (California), EPA |
| California Destination-Operators-Buyers Warning | Click Here For California Proposition 65 Warning |
| Stk. Itm. | No |
Documents
Pump Details
| Pump Type | SAE Centrifugal Pump |
|---|---|
| Pump Style | SAE Centrifugal Pump |
| Inlet Diameter | 5" |
| Outlet Diameter | 4" |
| Max Gallon Per Min (GPM) (See Pump Curve For Your Duty Point Estimates) | 1,298.0 |
| Max Total Head (Static) | 242 Feet |
| Maximum Pressure (PSI) | 105 |
| Max Suction Lift (Static, Wet, @ Sea Level) | 20 Feet |
| Max Casing (Working) Pressure | 110 |
| Solids Handling | No |
| Self Priming Pump | No, Flooded Suction Only |
| Pump Housing Drain | Yes |
| Housing Material | Cast Iron |
| Impeller Diameter | 9.0" |
| Impeller Material | Cast Iron |
| SAE Flywheel Housing Size | #3, #4 |
| Shaft Seal | Packing Gland |
| Shaft Sleeve Material | Stainless Steel |
| Shaft Spline Size | 1.5-10T |
| Temperature Range | To 140F |
| Port Type(s) | Flange |
| Altitude Affected | Yes |
Berkeley by Pentair SAE Engine Mount Centrifugal Pump - B85719, Model B4ZQBH, 5"x4", Flanged, Cast Iron, S.A.E. Housing Size: 3, 4, 1.5-10T Shaft Spline Size
- 1298 GPM
- 242 Feet Total Dynamic Head
- S.A.E. Housing Size # 3, 4
- S.A.E. Shaft Spline Size: 1.5-10T
- 2.81, 2.63" Shaft Length
- Packing Gland Seal Type
The Berkeley B-Series SAE Engine Mount Centrifugal Pump creates the new standard in full-performance reliability. The double-volute cast iron case is precisely designed for excellent hydraulic efficiency, range and reduced bearing loads which significantly extend the bearing life. Designed for durability, the state of the art design, utilizing double row angular contact and deep grooved radial ball bearings delivers 20,000 hours of bearing life, one of the industry's longest life cycles. Bearing stress and load are reduced due to the internal hydraulic thrust control leading to increased bearing life.
- Shipments < 150 lbs. Will Be By FedEx Or UPS To Garage Or Front Door
- Shipments > 150 lbs. Will Be By Extes-Express, RL Carriers, Or Other To Curbside At Truck Deck Height
- Standard Freight To Lower 48 States
- Standard Freight Does Not Include Service To Alaska, Hawaii, Or Destinations Outside The United States. Contact Us To Make Other Accommodations For Shipments Outside The Lower 48 States.
