AMT Multistage Booster Pump - MSV1-2-3P, 1", 12.5 GPM, 0.50 HP, 208-230/460v, 3-Phase

SKU: MSV1-2-3P
Model: MSV1-2-3P
Status: Discontinued
This Product Has Been Discontinued.
We Recommend the Following:

Click Here to View Related Product(s)

Inlet Size
1"
Style
Electric Centrifugal Pump
Type
Multi-Stage Booster Pump
GPM
12.5
Engine/Motor
AMT by Gorman-Rupp
Power
Electric
Compliance

All 50 States

Product Details

Manufacturer AMT by Gorman-Rupp
SKU MSV1-2-3P
Model Number MSV1-2-3P
Alternate Model Number MSV1-2-3P
For Potable Water Use No

Engine/Motor Details

Engine/Motor Brand AMT by Gorman-Rupp
Fuel Type Electric
Engine/Motor Type Total Enclosed, Fan Cooled Dual Cycle
Starting System NA
Horsepower 0.5 HP
Phase 3-Phase
Pump Voltage 208 Volt (3-Phase), 230 Volt (3-Phase), 460 Volt (3-Phase)
Pump Voltage (50 Hz.) 190, 380
Frequency 60 Hz or 50 Hz (See Spec For Details)
Pump RPM 3450
NEMA Rating NEMA 56C (Motor Frame)

Accessories

Discharge Hose Add @ Checkout

Warranty

Warranty 1 Year

Other Information

Weight (Lbs.) 56
Ship Weight (Lbs.) 71
Free Shipping No
Unit Dimensions 20x8.6x8.2
UPC 72684652154
Agency Compliance CARB (California), EPA
California Destination-Operators-Buyers Warning Click Here For California Proposition 65 Warning
Stk. Itm. No

Pump Details

Pump Type Multi-Stage Booster Pump
Pump Style Electric Centrifugal Pump
Inlet Diameter 1"
Outlet Diameter 1"
BEP Gallon Per Minute 9.5
BEP Max Total Head (Static) 44.0
BEP Max PSI 19
Max Gallon Per Min (GPM) (See Pump Curve For Your Duty Point Estimates) 12.5
Max Total Head (Static) 55 Feet
Maximum Pressure (PSI) 24
Max Casing (Working) Pressure 232 PSI
Solids Handling No
Self Priming Pump No, Flooded Suction Only
Housing Material Cast Iron
Impeller Material 304 Stainless Steel
Seal Material (Mechanical Or Other) EPDM/Tungsten Carbide (Easy Replacement)
Temperature Range To 180 F
Pumps Stages 2
Port Type(s) FNPT
Altitude Affected Yes

AMT By Gorman-Rupp Multi-Stage Booster Pump – Two Stage, 208-230-460 Volts, 3-Phase

  • NEMA 56C Dual Cycle 50 and 60 Hz, ¾ HP, 3-phase, Totally Enclosed, Fan Cooled motor
  • Best Efficient Point is when this pump is operating at 9.5 GPM and Max Total Head of 44 feet
  • Cast Iron base and adapter
  • 1 inch NPT cast iron flanges
  • 304 series stainless steel components with Teflon wear rings
  • EPDM-Tungsten Carbide Seal that is easy to remove and replace

The AMT MSV1-2-3P is a non-self-priming/gravity feed pump with high pressure and low output.  This unit is more commonly referred to as a jockey pump and is often installed for water transfer uses where no suction lift is required such as boiler feed, condensate return, high pressure washdown, irrigation, booster service, and fire protection/sprinkler systems.  These pumps have NOT been investigated for use in drinking water systems.  

  • Shipments < 150 lbs. Will Be By FedEx Or UPS To Garage Or Front Door
  • Shipments > 150 lbs. Will Be By Extes-Express, RL Carriers, Or Other To Curbside At Truck Deck Height
  • Standard Freight To Lower 48 States
  • Standard Freight Does Not Include Service To Alaska, Hawaii, Or Destinations Outside The United States. Contact Us To Make Other Accommodations For Shipments Outside The Lower 48 States.
Learn More

We found other products you might like!

© 2021 Absolute Water Pumps. All Rights Reserved.