AMT Inline Centrifugal Circulator Pump - 5690-97, 32 GPM, 0.25 HP, 115v, Bronze

SKU: 5690-97
Model: 5690-97
Status: Discontinued
This Product Has Been Discontinued.
We Recommend the Following:

Click Here to View Related Product(s)

Inlet Size
Add @ Checkout
Style
Electric Centrifugal Pump
Type
Inline Circulator Pump
GPM
32.0
Engine/Motor
AMT by Gorman-Rupp
Power
Electric
Compliance

All 50 States

Product Details

Manufacturer AMT by Gorman-Rupp
SKU 5690-97
Model Number 5690-97
Alternate Model Number 5690-999-97
For Potable Water Use No

Engine/Motor Details

Engine/Motor Brand AMT by Gorman-Rupp
Fuel Type Electric
Engine/Motor Type Open Drip Proof
Starting System NA
Horsepower 0.25 HP
Phase Single-Phase
Pump Voltage 115 Volt (Single-Phase)
Frequency 60 Hz
Rated Current 5.4 Amps
Pump RPM 1725
Thermal Overload Protect Yes
NEMA Rating NEMA 56J (Motor Frame)

Warranty

Warranty 1 Year

Origin

Built In United States (Assembly)

Other Information

Weight (Lbs.) 25
Ship Weight (Lbs.) 35
Free Shipping No
Unit Dimensions 21 x 9 x 10
UPC 72684651399
Agency Compliance CARB (California), EPA
California Destination-Operators-Buyers Warning Click Here For California Proposition 65 Warning
Stk. Itm. No

Pump Details

Pump Type Inline Circulator Pump
Pump Style Electric Centrifugal Pump
Inlet Diameter Add @ Checkout
Outlet Diameter Add @ Checkout
Discharge Port Rotation 90 Degree Increments
Max Gallon Per Min (GPM) (See Pump Curve For Your Duty Point Estimates) 32.0
Max Total Head (Static) 7 Feet
Maximum Pressure (PSI) 3
Max Casing (Working) Pressure 150 PSI
Solids Handling No
Self Priming Pump No, Flooded Suction Only
Seal Wash-Vent Port Included
Housing Material Bronze
Impeller Type High Efficiency, Closed
Impeller Material Stainless Steel
Seal Material (Mechanical Or Other) EPDM/EPR
Shaft Material Stainless Steel
Temperature Range To 225 F
Flange Face To NPT Face Thickness 3/4"
Port Type(s) Flange Kit Add @ Checkout, NPT
Altitude Affected Yes

AMT Inline Centrifugal Circulator Pump – 32 GPM, 0.25 HP, 115 Volts, Continuous Duty, Bronze

  • NEMA 56J, 1/4 HP, single phase, Open Drip Proof, continuous duty electric motor with 1/2-14 NPSM conduit connection
  • Durable bronze construction with high efficiency, stainless steel, closed impeller
  • Motor shaft is constructed with 300 series stainless steel
  • 4-bolt flange feature for 360 degree mounting rotation in 90 degree increments
  • EPDM/EPR mechanical seal and O-ring for long service life in extreme environmental conditions
  • Direct coupled design for reduced maintenance
  • Thermal overload protection

The AMT 5690-97 is an industrial grade, continuous duty, inline pump with a closed coupled design and 1/8 inch NPT seal wash/vent port that can be mounted horizontally or vertically.  This pump is a quality replacement for manufactures such as Armstrong and TACO. For this model connection flanges are available from 3/4 inch to 1-1/4 inch.  See information below for manufacture cross reference replacement models.

Manufacture Cross Reference

  • Flange to Flange width is 6.4 inches
  • Bell and Gossett Series: 100NFI
  • Armstrong Series: S-25
  • TACO Series: 110
  • Dayton (Cast Iron): 4RD16
Customers Buying This Product Also Purchased These Accessories
  • Shipments < 150 lbs. Will Be By FedEx Or UPS To Garage Or Front Door
  • Shipments > 150 lbs. Will Be By Extes-Express, RL Carriers, Or Other To Curbside At Truck Deck Height
  • Standard Freight To Lower 48 States
  • Standard Freight Does Not Include Service To Alaska, Hawaii, Or Destinations Outside The United States. Contact Us To Make Other Accommodations For Shipments Outside The Lower 48 States.
Learn More

We found other products you might like!

© 2021 Absolute Water Pumps. All Rights Reserved.