All-Flo Hygienic & Sanitary Double Diaphragm Pump - H038-THL-ETEE-S70, 3/8", Stainless Steel, EPDM, 7.9 GPM, 120 PSI

SKU: H038-THL-ETEE-S70
Model: H038-THL-ETEE-S70
Status: Discontinued
This Product Has Been Discontinued.
We Recommend the Following:

Click Here to View Related Product(s)

Inlet Size
0.375"
Style
Diaphragm Pump
Type
Double Diaphragm Pump
GPM
7.9
Engine/Motor
None
Power
Air
Compliance

All 50 States

Product Details

Manufacturer All-Flo
SKU H038-THL-ETEE-S70
Model Number H038-THL-ETEE-S70
Product Series H Series
Item Code C
For Potable Water Use No

Engine/Motor Details

Engine/Motor Brand None
Fuel Type Air
Muffler/Exhaust Included
Muffler Material Plastic

Warranty

Pump Warranty 5 Years

Origin

Built In United States (Assembly)

Other Information

Weight (Lbs.) 11
Free Shipping Yes
Unit Dimensions 5.9" D x 6.5" W x 12.5" H
Agency Compliance CARB (California), EPA
California Destination-Operators-Buyers Warning Click Here For California Proposition 65 Warning
Stk. Itm. No

Repair Kits & Parts (Sold Separately)

Replacement Air End Repair Kit HAK-038-N
Wet End Repair Kit (Diaphragms, Valves, O-rings) HWE-038-ETEE

Pump Details

Pump Type Double Diaphragm Pump
Pump Style Diaphragm Pump
Inlet Diameter 0.375"
Outlet Diameter 0.375"
Max Gallon Per Min (GPM) (See Pump Curve For Your Duty Point Estimates) 7.9
Max Total Head (Static) 276 Feet @ 120 PSI Pressure Inlet/Outlet PSIG
Max Air Pressure (PSI) 120
Max Suction Lift (Dry, @ Sea Level) 4.9 Feet
Max Suction Lift (Wet, @ Sea Level) 29.5 Feet
Solids Handling Yes
Max Solids Handling (Inches) 0.125"
Self Priming Pump Yes, Dry Prime
Valve Type Ball
Air Inlet Size 0.125"
Fluid Chamber Material Polished 316L Stainless Steel
Inner Chamber (Air Section) Material Polyethylene
Diaphragm Material (Elastomer) EPDM (Rubber Curve)
Ball-Valve Material PTFE (Teflon)
Valve Seat Material N/A
O-Ring Material EPDM
Port Type(s) 1/2" Tri Clamp
Fluid Porting Suction Right - Discharge Right
Max Temp Of Elastomers 176 F

All-Flo Hygienic & Sanitary Double Diaphragm Pump - H038-THL-ETEE-S70, 3/8", Stainless Steel, EPDM, 7.9 GPM, 120 PSI

  • Air Inlet 1/8"
  • Liquid Inlet 3/8"
  • Liquid Outlet 3/8"
  • Maximum Flow 7.9 GPM
  • Maximum Air Pressure 120 PSI
  • Maximum Solids 1/8"
  • Max Suction Lift Dry 4.9 Feet
  • Max Suction Lift Wet 29.5 Feet
  • Max Temperature 176 F

*Click the Specs tab to the right for more specifications, details, etc.

Customers Buying This Product Also Purchased These Accessories
  • Shipments < 150 lbs. Will Be By FedEx Or UPS To Garage Or Front Door
  • Shipments > 150 lbs. Will Be By Extes-Express, RL Carriers, Or Other To Curbside At Truck Deck Height
  • Standard Freight To Lower 48 States
  • Standard Freight Does Not Include Service To Alaska, Hawaii, Or Destinations Outside The United States. Contact Us To Make Other Accommodations For Shipments Outside The Lower 48 States.
Learn More

We found other products you might like!

© 2021 Absolute Water Pumps. All Rights Reserved.