All-Flo Double Diaphragm Pump - A150-BAA-TTYT-B30, 1 1/2", Aluminum, PTFE, 115 GPM, 120 PSI

SKU: A150-BAA-TTYT-B30
Model: A150-BAA-TTYT-B30
Status: Discontinued
This Product Has Been Discontinued.
We Recommend the Following:

Click Here to View Related Product(s)

Inlet Size
1.5"
Style
Diaphragm Pump
Type
Double Diaphragm Pump
GPM
115.0
Engine/Motor
None
Power
Air
Compliance

All 50 States

Product Details

Manufacturer All-Flo
SKU A150-BAA-TTYT-B30
Model Number A150-BAA-TTYT-B30
Product Series A Series
Item Code A
For Potable Water Use No

Engine/Motor Details

Engine/Motor Brand None
Fuel Type Air
Muffler/Exhaust Included
Muffler Material Plastic

Warranty

Pump Warranty 5 Years

Origin

Built In United States (Assembly)

Other Information

Weight (Lbs.) 58
Ship Weight (Lbs.) 73
Free Shipping Yes
Unit Dimensions 11.20" D x 20.8" W x 17.3" H
Agency Compliance CARB (California), EPA
California Destination-Operators-Buyers Warning Click Here For California Proposition 65 Warning
Stk. Itm. No

Repair Kits & Parts (Sold Separately)

Replacement Air End Repair Kit AAK-150-A
Replacement Air Valve Assembly AMK-150-A
Replacement Pilot Sleeve Assembly APK-150-A
Wet End Repair Kit (Diaphragms, Valves, O-rings) AWE-150-TTYT-M

Pump Details

Pump Type Double Diaphragm Pump
Pump Style Diaphragm Pump
Inlet Diameter 1.5"
Outlet Diameter 1.5"
Max Gallon Per Min (GPM) (See Pump Curve For Your Duty Point Estimates) 115.0
Max Total Head (Static) 276 Feet @ 120 PSI Pressure Inlet/Outlet PSIG
Max Air Pressure (PSI) 120
Max Suction Lift (Dry, @ Sea Level) 22 Feet
Max Suction Lift (Wet, @ Sea Level) 31 Feet
Max Suction Lift (Dry, If W/PTFE, @ Sea Level) 18 Feet
Solids Handling Yes
Max Solids Handling (Inches) 0.25"
Self Priming Pump Yes, Dry Prime
Valve Type Ball
Air Inlet Size 0.75"
Air Section Material Aluminum
Fluid Chamber Material Aluminum
Inner Chamber (Air Section) Material Aluminum
Diaphragm Material (Elastomer) PTFE (Teflon) (PTFE Curve)
Ball-Valve Material PTFE (Teflon)
Valve Seat Material Nylon
O-Ring Material PTFE (Teflon)
Pump Hardware Material Zinc Plated Steel
Port Type(s) BSP
Fluid Porting Suction Center Front-Discharge Center Rear
Max Temp Of Elastomers 180 F
Altitude Affected Yes

All-Flo Double Diaphragm Pump - A150-BAA-TTYT-B30, 1 1/2", Aluminum, PTFE, 115 GPM, 120 PSI

  • Air Inlet 3/4"
  • Liquid Inlet 1.5"
  • Liquid Outlet 1.5"
  • Maximum Flow 115 GPM
  • Maximum Air Pressure 120 PSI
  • Maximum Solids 1/4"
  • Max Suction Lift Dry 22 Feet
  • Max Suction Lift Wet 31 Feet
  • Max Temperature 180 F

*Click the Specs tab to the right for more specifications, details, etc.

Customers Buying This Product Also Purchased These Accessories
  • Shipments < 150 lbs. Will Be By FedEx Or UPS To Garage Or Front Door
  • Shipments > 150 lbs. Will Be By Extes-Express, RL Carriers, Or Other To Curbside At Truck Deck Height
  • Standard Freight To Lower 48 States
  • Standard Freight Does Not Include Service To Alaska, Hawaii, Or Destinations Outside The United States. Contact Us To Make Other Accommodations For Shipments Outside The Lower 48 States.
Learn More

We found other products you might like!

© 2021 Absolute Water Pumps. All Rights Reserved.